Tapco Intrafuse 10/22 Reviews

Stock fits perfect, no …

The Tapco Intrafuse 10/22 Stock fits perfect, no rattles at all. No chintzy cheezy construction either, it’s plenty durable. The only thing keeping it at four stars is I had to cut the first few bits off the top rail to fit my scope and caps. Mag well works fine for me, as do the SAW style handle and forend rail cover.

I have two of these …

I have two of these Tapco Intrafuse 10/22 stocks; the installation was easy and straight forward. Fit nicely, and stocks do not rattle. The SAW grip fits naturally, actually more comfortable for me than an AR grip would be. The only reason I did not give it five stars is that the instructions are poor. These stocks flat out work well.

This Tapco Intrafuse 10/22 was part of my

This Tapco Intrafuse stock was part of my first 10/22 “pimping,” and I’ve got to say – incredible. To start, this is a great way to turn your rifle into a Swiss army knife. Its sturdy and looks mean. Not to mention it’s a drop-in, and for me, it was easy to install. My only strife with the whole package is the hardware. The bolts for the stock are near impossible to attach to the stock without a rubber mallet or some gentle tapping with something hard. Directions were bunk as well. But the overall product was worth it. Turned my vanilla 10/22 into something meaningful. If your looking for a new 10/22 accessory this is the one to get.

Fit together nicely. I …

The Tapco Intrafuse 10/22 fits together nicely. I didn’t have an issue as the other people stated about sharp edges. The only complaint I have is the compartment lid in the pistol grip is a little hard to open and close.

The overall quality is …

The overall quality is “so-so.” First, the problems. Tubes are very tight to the main body making swapping them out impossible without some fitting/sanding work. Butt rattles on the tube. The stock had to be relieved to allow magazines to drop free. The SAW style pistol grip may be angled too much for some.

Great 10/22 Stock, I love that …

Great 10/22 Stock, I love that you can adjust the length of pull. The color really looks good with a blued barrel. The only improvement this set needs is an additional sling attachment nut so you can put one in the front and the other in the back.

The installation was …

The installation of the Tapco Intrafuse 10/22 was easy, looks great, but I couldn’t use a regular scope on the rifle. I had to buy a red dot scope that is considerably shorter than the scopes I normally use. I couldn’t get the front piece off to clean the rifle with a four powered scope on it.

Great and very fun 10/22 stock. …

Great and very fun 10/22 stock. Put this stock on my 10/22 and had no issues with installation, very snug fit with no rattles or sharp edges… at all! The only modification I did make was to take sandpaper and file out the mag well. It was a little tough for the stock 10/22 mag to come out, but if you are using an extended mag, you will have no problems (I always bring my 10 round mag along for that extra few rounds at the end of each round). I also really enjoy the extra rail in the front where I added a red dot magnification sight, and it worked out really well.

Great 10/22 stock option…

Great 10/22 stock option, installs easy, but I did have a little trouble putting the buttstock on. I’d like to try the slanted variation – but I know it’s going to be hard to get the other one-off. Besides that, it is solid. Get the Intrafuse vertical grip for the full package.

I love this 10/22 stock. The …

I love this 10/22 stock. The handgrip was a little sharp, so I took some sandpaper to it, and now it’s smooth. People say they can’t change the angle. Before you put an angle adaptor in, put a bunch of graphite powder in there. Now you can change the angle adaptors whenever you want. Great product and I will buy it again!