What people are saying about the Ghost Rocket Connector

Posted on by

Nice Improvement to a Great Pistol

The Ghost rocket connector made my Glock 23 trigger lighter and gave it a shorter reset. Easy to install if you have tools and patience. It does take some time to get the trigger stop right. I recommend an exceedingly minimal adjustment at a time till you get it to your liking. It feels better than the factory target trigger on my Glock 34; it’s next to get a Ghost Rocket Trigger Connector

Great Feeling & Reliable

It was a direct drop-in for my Glock 22, just double-check the clearance. I also polished all the metal moving parts that rub to make the pull as smooth as I could. For those of you with different models, follow the instructions on the site to correctly fit the glock trigger connector.

Worth the money

I installed this Ghost Rocket trigger connector in my Gen4 G17. Noticeable difference in the trigger pull. Very smooth and crisp. Relatively easy to install once you understand this is not a drop-in Glock connector. The bar extending to the right in the photo requires some grinding to fit correctly to reduce trigger travel. At first, I did not realize this was not a drop in the connecter and assembled the Glock without grinding the bar. It would not fire or disassemble. I had to lock the slide to the rear and remove the backplate, firing pin, and extractor and shake it till the slide came off. Once I figured out that I had to grind it down to fit correctly, it was straightforward to install and work great. The only reason I did not give it five stars is that some instructions should have came with the part that informed you on how to make it fit properly.

LIVES UP TO THE HYPE

MY SGT HAS BEEN USING THIS CONNECTOR FOR THE LAST YEAR AND LOVED IT. HE WAS SPEAKING TO SOME OF OUR TEAM MEMBERS AT THE RANGE A FEW WEEKS BACK, AND I HEARD HIM SAYING HOW MUCH HE LIKED IT. BEING THE WEAPONS JUNKIE THAT I AM I ASKED IF I COULD LOAD UP A MAG AND GIVE IT A TRY. IT WAS LOVE AT FIRST PULL. I HAD ALWAYS USED THE STANDARD GLOCK FACTORY TRIGGER AND THOUGHT THAT WAS AS GOOD AS IT GOT. I WAS WRONG. THE PULL WITH THE ROCKET IS LITE AND CRISP FOLLOWED BY A TRIGGER RESET THAT USES SO LITTLE MOVEMENT YOU COULD MISS IT IF YOU ARE NEW TO FIREARMS. I NOW USE THE ROCKET IN MY DUTY WEAPON AND BOTH MY SIDEARMS. IF YOU TRY IT YOU’LL LOVE IT.

Right Product Takes Careful Adjustment

You should go to the Ghost website and look at the pictures carefully before you start and READ the data about the Dave Spaulding angle that is on the site. Be careful, if you get the angle too steep it appears to capture the sear bar and will not allow the gun to fire, then you must shorten the TCT bar well past the sear release to get the sear to come up. Adjust the TCT square first, until the gun fires, then give the bottom a little angle, do not do both cuts at once. Do buy the orange half-size slide block so you can trip the sear. When finished, do yourself a favor and combine the rocket with titanium safety. Add a little synthetic liquid grease to the striker and the sear, and it is a fantastic transformation.

Trigger Job

This Ghost Rocket Connector is the third and final part of my trigger job on all my Glocks. Must be careful to take off only what is needed to make each gun ultimately an excellent trigger job with trigger stopping just after let off. Just follow understandable instructions, and you will have a great trigger. The first two parts of this trigger job is a Titanium striker and safety plunger. If done correctly, you will be pleased.

Repeat Customer

I Have Ghost Rocket Connector installed on my 35 and Gen 4 22. Work great and help with trigger pull and quick trigger reset. Had them installed by a company rep, who does excellent work.

By far the best Glock 3.5 connector.

I have used the Glockworx, and OEM Glock 3.5 connector, and they do not even come close to comparing to the Ghost Rocket. By far the smoothest connector I have used.

Works Great!

Works perfectly. I’ve been using this for practical competition shooting for over 20,000 rounds just this past year. The only small downside is it requires fitting that may take a while if it’s your first time. However, after fitting, it works like a charm.

Excellent but watch out

This is an excellent upgrade for a Glock; however, if you switch uppers (like the change to an aftermarket .22LR), make sure you take the backplate off and use the orange (set up backplate). Check to make sure the gun will fire before you just put the different upper on. Since it has the trigger stop, it is possible the mixed upper will not let the striker fall.

Wow!

I have two other glock ghost connector in my other Glock 17’s. Didn’t have to fit those. I understood that fitting was required for this part, so I took it to a machinist to make it fit correctly. (cost $20)Showed him the measurement and instructions. It didn’t work. Had to take the slide apart, the trigger wouldn’t set. Very odd for a ghost trigger part, have used them for years.